Belt Bucket Elevator
Product Description for TD Belt Type Bucket Conveyor
TD belt bucket elevator is suitable for vertical conveying of powdery, granular, and small-sized bulk materials with low abrasiveness and suction, such as grain, coal, cement, crushed ore, etc., with a height of 40m.
The characteristics of TD belt bucket elevator are: simple structure, stable operation, excavation type loading, centrifugal gravity type unloading, material temperature does not exceed 60 ℃; TD bucket elevators are compared with traditional D type bucket elevators. It has high conveying efficiency and many hopper forms, so it should be preferred. TD type bucket elevator is equipped with four kinds of hoppers, namely: Q type (shallow bucket), H type (arc bottom bucket), ZD type (medium deep bucket), SD type (deep bucket).
Working Principle
TD belt bucket elevator consists of running part (bucket and traction belt), upper section with drive drum, lower section with tension drum, middle casing, driving device, backstop braking device, etc. It is suitable for upward transportation of non-abrasive and semi-abrasive bulk materials with bulk density ρ<1.5t/m3, granular and small blocks, such as coal, sand, coke powder, cement, crushed ore, etc.
Advantages
1).TD Belt Bucket elevator has less requirement on materials, features and the bulk. It can lift, the powder, granular and bulk materials.
2).The max lifting capacity is 4,600m3/h.
3).Bucket elevator adopts inflow feeding, gravity induced discharge, and use large capacity hopper.
4).The traction parts adopt wear-resistant chains and steel wire belt to extend the service life of the traction parts.
5).Bucket elevator runs smoothly, generally the lifting height is 40m or even higher.
Parameter Sheet
|
Model |
Max Feed Size (mm) |
Capacity (Ton/Hour) |
Lifting Speed (m/s) |
Belt Width (mm) |
Lifting Height (m) |
|
TD160 |
25 |
5.4-16 |
1.4 |
200 |
<40 |
|
TD250 |
35 |
12-35 |
1.6 |
300 |
<40 |
|
TD315 |
45 |
17-40 |
1.6 |
400 |
<40 |
|
TD400 |
55 |
24-66 |
1.8 |
500 |
<40 |
|
TD500 |
60 |
38-92 |
1.8 |
600 |
<40 |
|
TD630 |
70 |
85-142 |
2 |
700 |
<40 |
How to confirming the model
1.The height of bucket elevator or the height from inlet to outlet.
2.Whats the material to be conveyed and the material feature?
3.The capacity that you require?
4.Other special requirement.
Related products
-
Chain Plate Bucket Elevator
Product Description for TH Chain Bucket elevator NE chain plate bucket elevator is a relatively vertical lifting equipment in China, which can be widely used to lift various bulk materials. Such as: ore, coal, cement, cement clinker, grain, chemical fertilizer, etc. In various industries, this type of elevator is widely used. Due to its energy saving, it has become the choice to replace the TH type chain elevators. ...
-
Round Chain Bucket Elevator
Product Description for TH Chain Bucket elevator TH chain bucket elevator is a kind of bucket elevator equipment for continuous vertical lifting of bulk materials. The temperature of the lifting material is generally below 250°C, and it has the characteristics of large lifting capacity, stable operation, small footprint, high lifting height, and easy operation and maintenance. ...
